The transfer adhesive tape consists of a modified acrylate adhesive, that has a very good resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The high-shear-resistant transfer adhesive has an excellent permanent adhesion on metal, painted and highly energetic plastic surfaces as well as good permanent adhesion on low-energetic surfaces.
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
|---|---|---|
| Resistance to solvents and chemicals | Mineral oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | with professional bonding | resistant against most |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 150 °C |
central European normal climate, short-term up to 190 °C |
| Adhesive power | 18 N/25 mm | after 1 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film |
|---|---|---|
| 22 N/25 mm | after 20 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
| 27 N/25 mm | on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
| Initial adhesion (loop tack) | 20 N/25 mm | Average value, FINAT TM 9 |
| Maximum shear strength | 400 Hour(s) | at 23 °C, on stainless steel | Average value, FINAT TM 8, covered on one side with 0.05 mm polyester film |
| 6 Hour(s) | at 70 °C, on stainless steel | Average value, FINAT TM 8, covered on one side with 0.05 mm polyester film |
| Application temperature | Minimum temperature 15 °C |
|---|
| Adhesive covered side | Modified acrylate (glass-fibre reinforced) |
|---|---|
| Adhesive open side | Modified acrylate (glass-fibre reinforced) |
PDF, 88.28kB, 1 Page
PDF, 88.64kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.