Technical data sheet - English (EN)
PDF, 36.46kB, 1 Page
The double-sided adhesive tape consists of a white hard PVC film carrier that is coated on both sides with a modified acrylate adhesive which has a very good resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The shear-resistant adhesive also has excellent permanent adhesion to metal, paint and other high-energy plastic surfaces as well as good permanent adhesion to low-energy surfaces. Also suitable for rough or structured surfaces because of high mass application.
Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
---|---|---|
Resistance to solvents and chemicals | Mineral oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | |
UV resistance | Highly recommended | |
Water resistance | Highly recommended | |
Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 70 °C |
Adhesive power | 32 N/25 mm | on stainless steel, after 1 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film |
---|---|---|
36 N/25 mm | on stainless steel, after 20 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
38 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
Initial adhesion (loop tack) | 23 N/25 mm | Average value, FINAT TM 9 |
Maximum shear strength | 400 Hour(s) | on stainless steel, at 23 °C | Average value, FINAT TM 8, covered on one side with 0.05 mm polyester film |
6 Hour(s) | on stainless steel, at 70 °C | Average value, FINAT TM 8, covered on one side with 0.05 mm polyester film |
Application temperature | Minimum temperature 15 °C |
---|---|
Substrate material /substrate | Paint, Metal, Highly energetic plastics |
Liner |
Liner: Paper siliconised on both sides Surface weight: 90 g/m² |
|
---|---|---|
Adhesive covered side | Modified acrylate | |
Carrier |
Colour carrier: White Carrier: PVC |
Format | Roll, Cut | |
---|---|---|
Cutting roll width | 12 mm | |
15 mm | ||
19 mm | ||
25 mm | ||
30 mm | ||
38 mm | ||
50 mm | ||
60 mm | ||
75 mm | ||
100 mm | ||
Standard width | 1000 mm | |
1260 mm | ||
1372 mm | ||
Standard length | 50 m |
PDF, 36.46kB, 1 Page
PDF, 39.04kB, 2 Pages
PDF, 89.02kB, 1 Page
PDF, 163.28kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 480.85kB, 2 Pages