Career
Contact

ORABOND® 1812TM

The double-sided adhesive tape consists of a white closed-cell polyethylene foam that is coated on the both sides with an acrylate adhesive. The adhesive is characterised by a very high initial adhesion, even on rough and critical substrate surfaces.

Product information

Technical properties

Resistance

Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 100 °C 		central European normal climate

Adhesive properties

Adhesive power 18 N/25 mm after 1 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film
18 N/25 mm after 20 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film, foam splitting
18 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film, foam splitting
Initial adhesion (loop tack) 30 N/25 mm Average value, FINAT TM 9
Maximum shear strength 300 Hour(s) on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
6 Hour(s) on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
Processing
Application temperature Minimum temperature 15 °C
Product Construction
Adhesive covered side Modified acrylate
Adhesive open side Modified acrylate
Carrier Colour carrier: White
Carrier: Closed-cell polyethylene foam
Dimensions
Format Roll, Cut
Cutting roll width 12 mm
19 mm
25 mm
50 mm
Standard width 1550 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.

Back to top