Perforated, white, glossy special PVC film with black rear for the use on level, transparent substrates and glass. Printing the film front results in a visible print image, whereby the perforated black rear is translucent. The share of printable areas on the overall area amounts to 50 %.
| Durability | 4 Year(s) | Applies for vertical outdoor weathering, central European normal climate; unprinted |
|---|---|---|
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Tensile strength |
Minimum tensile strength along: 5 MPa Minimum tensile strength across: 5 MPa |
EN ISO 527, average value |
| Adhesive power | 3 N/25 mm | after 24 h, glass | FINAT TM 1, average value |
|---|---|---|
| Adhesive | Removable |
| Recommended printing procedure | Inkjet printing with solvent-based inks |
|---|---|
| Application temperature | Minimum temperature 10 °C |
| Liner | Non-perforated silicone cardboard coated on one side |
|---|---|
| Front material |
Thickness front material: 0.14 mm Front material: Perforated special PVC film |
| Adhesive | Solvent-polyacrylate |
| Thickness | 0.14 mm | without protective liner and adhesive, average value |
|---|
| Format | Roll |
|---|---|
| Standard width | 1370 mm |
| 1520 mm | |
| Standard length | 25 m |
| 50 m |
PDF, 92.90kB, 2 Pages
PDF, 97.91kB, 2 Pages
PDF, 89.41kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 2.79MB, 20 Pages
PDF, 1.77MB, 11 Pages
Premium cast PVC film with glossy surface, with highly effective UV protection and optimized hardness setting, specifically developed for the lamination of the ORAJET® Window Graphics films.